Hiển thị một kết quả duy nhất

FIE là dòng Biến tần vector vòng kín cao cấp thế hệ mới của V&T. Được thiết kế phù hợp với nhiều ứng dụng, đặc biệt phù hợp với các ngành nâng – hạ, cẩu trục, giấy, sợ, bao bì, thang máy, các ngành đá, gạch, gỗ, ngành đùn nhựa, ngành kim loại, ngành bơm – quáy, máy nén khí, máy công cụ… và các ngành công nghiệp khác.

Mã sản phẩm:
FIE

Mô tả ngắn:
Technical specifications of the FIE Item Specifications Standard functions Maximum frequency • Vector control: 0–300 Hz• V/F control: 0–320 Hz Carrier Frequency 0.5–16 kHz The carrier frequency is automatically adjusted based on the load features. Input frequency Resolution Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.025% Control mode • Sensorless flux vector control (SFVC) • Closed-loop vector control (CLVC) • Voltage/Frequency (V/F) control Startup torque • G type: 0.5 Hz/150% (SFVC); 0 Hz/180% (CLVC) • P type: 0.5 Hz/100% Speed range 1:100 (SVC)        1:1000 (FVC) Speed stability ±0.5% (SVC)       ±0.02% (FVC) Torque control ±5% (FVC) Overload capacity • G type: 60sor 150% of the rated current, 3s for 180% of the rated current • P type: 60s for 120% of the rated current, 3s for 150% of the rated current Torque boost • Fixed boost• Customized boost 0.1%–30.0% V/F curve • Straight-line V/F curve• Multi-point V/F curve • N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power,square) V/F separation Two types: complete separation; half separation Ramp mode • Straight-line ramp• S-curve ramp Four groups of acceleration/deceleration time with the range of 0.0–6500.0s DC braking DC braking frequency: 0.00 Hz to maximum frequency Braking time: 0.0–36.0s Braking action current value: 0.0%–100.0% JOG control JOG frequency range: 0.00–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s Onboard multiple preset It implements up to 16 speeds via the simple PLC function or combination of DI terminal states. Onboard PID It realizes process-controlled closed loop control system easily. Auto voltage regulation It can keep constant output voltage automatically when the mains voltage changes. Over voltage/ Over current stall Control The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current. Fast current limiting function Minimizing over-current fault protect the normal operation of the inverter Torque limit and control It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the CLVC mode. Individualized functions High performance Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology. Power dip ride Through The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. Rapid current limit It helps to avoid frequent over current faults of the AC drive. Virtual I/Os Five groups of virtual DI/Dos can realize simple logic control. Timing control Time range: 0.0–6500.0 minutes Multi-motor switchover Four motors can be switched over via four groups of motor parameters. Multiple communication It supports communication via Modbus -RTU, PROFIBUSDP, CAN link and CAN open. Motor overheat Protection The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. Multiple encoder Types It supports various encoders such as differential encoder, open-collector encoder, resolver, UVW encoder, and SIN/COS encoder. RUN Running command source • Operation panel • Control terminals • Serial communication port You can perform switchover between these sources in various ways. Frequency source There are a total of 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. You can perform switchover between these sources in various ways. Auxiliary frequency source There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis. Input terminal Standard: 5 digital input (DI) terminals, one of which supports up to 100 kHz high-speed pulse input 2 analog input (AI) terminals, one of which only supports 0–10 V voltage input and the other supports 0–10 V voltage input or 4–20 m A current input Expanding capacity: 5 DI terminals 1 AI terminal that supports -10–10 V voltage input and also supports PT100\PT1000 Output terminal Standard 1 high-speed pulse output terminal (open-collector) that supports 0–100 kHz square wave signal output 1 digital output (DO) terminal 1 relay output terminal 1 analog output (AO) terminal that supports 0–20 m A current output or 0–10 V voltage output Expanding capacity: 1 DO terminal 1 relay output terminal 1 AO terminal that supports 0–20 m A current output or 0–10 V voltage output Display and operation on the operation panel LED display It displays the parameters. LCD displaying Optional parts, Chinese/English Prompt action content Parameters of the copy Achieved through the LCD operation panel option parameters of rapid replication Key locking and function selection It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function. Protection mode Motor short-circuit detection at power-on, input/output phase loss protection, over current protection, over voltage protection, under voltage protection, overheat protection and overload protection Environment Installation Location Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt. Altitude Lower than 1000 m Ambient Temperature -10°C to +40°C (de-rated if the ambient temperature is between 40°C and 50°C) Humidity Less than 95%RH, without condensing Vibration Less than 5.9 m/s2 (0.6 g) Storage Temperature- - 20℃ ~ + 60℃ IP level IP20 Pollution degree PD2 Power distribution System TN , TT Mọi yêu cầu hỗ trợ kỹ thuật về sản phẩm và cũng như yêu cầu báo giá vui lòng liên hệ theo thông tin: Mr Bụi : 0938 416 567 – 0909 629 558 Email: Buinvt@gmail.com
Mã sản phẩm:
FWI-FI71-20D0110

Mô tả ngắn:
Biến tần V&T 1.5KW 220VAC, FWI-FI71-20D0110 Technical specifications Table 1-3  General technical specifications Input Power Input Voltage Uin 200V(−10%)~240V(+10%)   1/3PH 380V(−10%)~480V(+10%)   3PH Input Frequency 48Hz~62Hz Maximum Supply Imbalance ≤3% Power Output Output Voltage 0V~Uin Output Frequency 0Hz~300Hz Main Performance Function Voltage Control V/F, Open loop Vector Control Switching Frequency 1kHz~15kHz Adjust Speed range Open loop vector -1:100, V/F mode -1:50 Start Torque 0.5Hz: 100% rated torque, 1Hz: 150% rated torque Torque Accuracy 7% Torque ripple ≤2% Speed accuracy ≤1%n (Under the rated operating conditions) Reference Resolution Digit- 0.01Hz, Analogue- 0.1%×Max. frequency Accel. & Decel. Rate 0.1s~3600s Voltage Boost 0.1%~30.0% Overload 150% rated output current, 1 minute V/F 4 types: V/F (user can program) and ramp (2.0 power, 1.7 power, 1.2 power) DC Braking Injection frequency: 0.0%~20.0% Max. frequency Injection current: 0.0%~300.0% rated current Injection time: 0.0s~60.0s Dynamic Braking Brake rate: 0.0%~100.0% Jog Jog frequency: 0.00Hz~50.00Hz Jog interval time: 0.1s~60.0s Preset 4 speeds (decided by control terminals) AVR Maintain the rated output voltage when the input power supply voltage changed. Special Performance Function Internal PID Easy to form a closed-loop control system Control Terminal Reference Source Digit: display panel, motorized pot (E-Pot), PID, comms. Analogue: AI: 0V~10V, 0(4)mA~20mA, keypad potentiometer Operation Mode Keypad, control terminals, serial comms. Digital Input Terminals DI1~DI4: programmable terminals Analogue Input Terminal AI: programmable terminal, 0V~10V, 0(4)mA~20mA, can be used as digital input terminal by programming Analogue Output Terminal AO: programmable terminal, 0V~10V, can be used as digital output terminal by programming Status Relay 1 programmable relay, contactor data: AC250V/2A(COSφ=1) AC250V/1A(COSφ=0.4) DC30V/1A Comms. Connectors Terminals A, B Protocol Modbus RTU Environment Altitude 1000m rated 1000m~3000m,1% rated current derating per 100m Operating Temperature -10°C~+40°C Max. Humidity ≤90%RH, no-condensing Vibration ≤5.9m/s2(0.6g) Storage Temperature −40°C~+70°C Running Environment Indoor, non-flammable, no corrosive gasses, no contamination with electrically conductive material, avoid dust which may restrict the fan Protection Output shortage, over current, over load, over voltage, under Voltage, phase loss, over heat (heatsink and junction), external trip, etc. Efficiency ≥89% Mounting Method Surface mounting, DIN rail Enclosure IP00, IP20 (by adding optional device) Cooling Method 0.4kW model is nature cool, others are forced air cool